Experimental study of a lenticular jet
Abstract
Non-circular jets, particularly elongated jets and jets with sharp corners, are of interest due to their enhanced large- and small-scale mixing and combustion stability. Non-circular jet geometries such as elliptic, triangular, rectangular, and square have been extensively studied. The non-uniform curvature and elongated design of elliptic and rectangular jets has been shown to facilitate axis switching. Additionally, jets with sharp corners have been shown to facilitate small-scale mixing and further vortex ring deformation, as has been observed in triangular, square, and rectangular jets. There are, however, currently no data on the flow characteristics of a jet that combines these two features, i.e., it enhances both large- and small-scale mixing. The jet is issuing from a nozzle shape defined by two arcs of a circle connecting at sharp corners in the shape of an eye (hereafter termed 'lenticular'). The current study uses experimental techniques to characterize the lenticular jet and compare its behavior to previously studied circular and non-circular jets. Additionally, snapshot POD analysis was used to identify coherent structures and their dynamic features. The lenticular jet was found to have higher entrainment and stronger mixing than a traditional round jet, and comparable mixing and entrainment characteristics as previously studied non-circular jet geometries. It is particularly interesting to compare the jet behavior of the lenticular jet to an elliptic jet. The geometry of these two jets is extremely similar, the difference being sharp corners along the major axis of the lenticular jet. By comparing the lenticular jet and the elliptic jet, the effect of sharp corners, which have been shown to increase small-scale mixing and vortex ring deformation, can be observed. It was found that along the minor axis, where geometry was similar, shear layer turbulence intensity and spreading rate of the jets were also similar. Along the major axis, however, introducing corner features in the lenticular jet lowered the spread rate, resulted in a faster breakdown of turbulence in the shear layer, increased exit turbulence, and resulted in anisotropic centerline turbulence. Geometry of a jet issuing from a novel exit shape defined by two arcs of a circle connecting at sharp corners. The exit shape has been termed lenticular and possesses characteristics known to increase both large- and small-scale mixing. The ensuing jet sharply contracts along the major axis and rapidly expands along the minor axis resulting in an axis switch.
- Publication:
-
Experiments in Fluids
- Pub Date:
- April 2020
- DOI:
- 10.1007/s00348-020-2930-z
- Bibcode:
- 2020ExFl...61...95M