The width of exciton formation zone dominates the performance of phosphorescent organic light emitting diodes
Abstract
Phosphorescent organic light emitting diodes (PHOLEDs) have been fabricated with structure of indium tin oxide/MoO3 doped 4,4'-N,N'-dicarbazole-biphenyl (CBP) 30 nm/tris(4-carbazoyl-9-ylphenyl)amine 10 nm/CBP doped with tris(2-phenylpyridine)iridium(III) (CBP:Ir(ppy)3) x/bathocuproine 50 nm/LiF 1 nm/Al, where x = 2.5, 5, 10, and 20 nm, respectively. The current efficiency (CE) of device with x = 10 nm is higher than those with x = 2.5 and 5 nm, mostly because the width of exciton formation zone (5.7 nm) with x = 10 nm is larger than those (2.5 and 5 nm) with x = 2.5 and 5 nm. However, the current density with x = 10 nm decreases than those with x = 2.5 and 5 nm at a certain driving voltage, since the ~ 4.3 nm CBP:Ir(ppy)3 accommodating no exciton formation with x = 10 nm plays a role of transporting holes, raising ohmic loss of hole and thereby increasing driving voltage. When x increases from 10 to 20 nm, the width of exciton formation zone rises from 5.7 to 6.8 nm with CE almost unchanged, and the current density decreases as a result of increased ohmic loss of hole. The current research is useful to develop high-efficiency and low-driving voltage PHOLEDs.
- Publication:
-
Applied Physics A: Materials Science & Processing
- Pub Date:
- February 2020
- DOI:
- 10.1007/s00339-020-3400-4
- Bibcode:
- 2020ApPhA.126..243S
- Keywords:
-
- Organic light emitting diodes;
- The width of exciton formation zone;
- Hole-electron balance;
- Efficiency;
- Driving voltage