The Giant Magellan Telescope phasing strategy and performance
Abstract
The 25.4m Giant Magellan Telescope (GMT) consists of seven 8.4 m primary mirror (M1) segments with matching segmentation of the Gregorian secondary mirror (M2). When operating the GMT in the diffraction-limited Adaptive Optics (AO) modes, using the Adaptive Secondary Mirror (ASM), the M1-M2 pairs of segments must be phased to a small fraction of the observing wavelength. To achieve this level of correction across the scientific field of view (<90" in diameter), the phasing system relies on multiple (up to four) natural guide-star probes deployed across the field of view (from 6' to 10' from the center of the field) measuring at slow rates ( 0.033 Hz) segment phase piston in the infrared and low-order field-dependent phase aberrations in the visible. This paper describes the overall phasing strategy and requirements when operating in the Natural Guide-star AO (NGAO) and the Laser Tomography AO (LTAO) modes. We will also present a first evaluation of segment piston error induced by wind buffeting on the telescope structure. Wind loads have been computed for different observatory configurations using Computational Fluid Dynamics (CFD) simulations. This analysis showcases the GMT Dynamic Optical Simulation (DOS) environment which integrates the optical and structural dynamic models of the GMT with the Fourier optics models of AO and phasing sensors.
- Publication:
-
Ground-based and Airborne Telescopes VII
- Pub Date:
- July 2018
- DOI:
- 10.1117/12.2312236
- Bibcode:
- 2018SPIE10700E..0NQ