Repetitive Solid Spherical Pellet Injection and Irradiation toward the Repetitive-mode Fast-Ignition Fusion miniReactor CANDY.
Abstract
Pellet injection and repetitive laser illumination are key technologies for realizing inertial fusion energy[1-4]. Neutron generator using lasers also requires a repeating pellet target supplier. Here we present the first demonstration of target injection and neutron generation[5]. We injected more than 1300 spherical deuterated polystyrene(C8D8) bead pellet targets during 23 minutes at 1 Hz(Fig. 1). After the pellet targets fell for a distance of 18 cm, we applied the synchronized laser-diode-pumped ultra-intense laser HAMA. The laser intensity at the focal point is 5 x 1018 W/cm2, which is high enough to generate neutrons. As a result of the irradiation, we produced 2.45-MeV DD neutrons. Figure 2 shows the neutron time-of-flight signals detected by plastic scintillators coupled to photomultipliers. The neutron energy was calculated by the time-of-flight method. The maximum neutron yield was 9.5 x 104/4π sr. The result is a step toward fusion power and also suggests possible industrial neutron sources.
- Publication:
-
Journal of Physics Conference Series
- Pub Date:
- March 2016
- DOI:
- 10.1088/1742-6596/688/1/012026
- Bibcode:
- 2016JPhCS.688a2026H