Enhanced Heat Resistance of Al-Cu-Mg Alloy by a Combination of Pre-stretching and Underaging
Abstract
Enhanced heat resistance of Al-Cu-Mg alloy by employing a combined effect of pre-stretching and underaging has been characterized by thermal exposure, tensile testing, transmission electron microscopy (TEM) examination, and quantitative analysis. Tensile testing results showed that the samples subjected to both pre-stretching and underaging processing, presented a high tensile strength up to 440 MPa after thermal exposure at 200 °C for 500 h. This suggests that the long-time application temperature of Al-Cu-Mg alloys, which were normally applied at elevated temperature below 150 °C or even below 100 °C, can be raised to 200 °C by employing a combined effect of pre-stretching and underaging. TEM results showed that a fine and a narrow size distribution range of S' phase was formed by the combined processing of pre-stretching and underaging, as compared to that without pre-stretching. Quantitative analysis results indicated that this narrow range of size distribution greatly reduced the growth rate of S' phase during thermal exposure. It is suggested that this effect was ascribed to the Ostwald ripening mechanism.
- Publication:
-
Journal of Materials Engineering and Performance
- Pub Date:
- September 2016
- DOI:
- 10.1007/s11665-016-2152-y
- Bibcode:
- 2016JMEP...25.3793W
- Keywords:
-
- Al-Cu-Mg alloy;
- heat resistance;
- pre-stretching;
- size distribution;
- S‧ phase