Terrestrial laser scanning of anthropogenic beach berms for urban flood defense
Abstract
Globally, over 20 million people reside below present high tide levels and as many as 200 million are vulnerable to flooding during extreme events. In California, coastal flooding is driven by a combination of factors such as high astronomical tides, waves, storm surge, and other fluctuations such as those caused by the El Nino Southern Oscillation (ENSO), and climate change is likely to exacerbate those factors testing the limits of coastal flood defenses. Beaches provide natural flood protection during storms by mitigating the effects of high water levels and wave runup, and a process known as beach berming can be used to temporarily enhance the ability of beaches to withstand overtopping. In cases where beaches serve as primary protection for development, anthropogenic berms may represent an attractive management option for temporarily addressing future flood hazards. Terrestrial laser scanning (TLS) or lidar has emerged as a valuable technology for capturing the three dimensional geometry of complex surfaces and objects, and in the context of coastal flood prediction mobile TLS could prove invaluable by quickly mapping beach topography before an imminent flood threat and reducing associated uncertainties in coastal flood forecasting systems. The research presented here highlights the results of a field campaign to document the initial conditions and dynamic erosion of anthropogenic berms using TLS. On three occasions in February and March of 2012, a prototype berm was constructed on the foreshore of the city of Newport Beach, CA at low tide, and was scanned to document its initial shape, and then scanned in near-continuous fashion with the rising tide to characterize its subsequent erosion. The purpose is two-fold: (1) to measure the performance of the TLS system relative to accuracy and assess strengths and drawbacks that are likely to bear on the suitability of this technology to support flood prediction as described above, and (2) to develop a better understanding of how typical southern California berms respond to hydrodynamic stresses (rising tides and waves). Near continuous scanning leads to a 4D model (3 spatial coordinates plus time) of the berm that documents its gradual erosion, including a characterization of how the berm crest and volume change over time, which offers primary data on how anthropogenic berms can be expected to perform during a flood event. Results reveal that TLS, when referenced to a temporary bench mark leveled to within 1.5 cm by RTK-GPS, achieves an absolute vertical accuracy of less than 3 cm (VRMSE) with a scan resolution of 10 cm or finer. In regards to berm morphodynamics, a near-linear increase in tide elevation over two hours caused a non-linear lowering of the berm crest with time, characterized first by a gradual and then by a rapid change. The overall erosion of the berm correlates best with the swash elevation in relation to the berm toe elevation. Across the three berm experiments, erosion begins when the swash elevation is about 13% below the toe of the berm, relative to the initial berm height, and the berm is overtopped when the swash elevation is 25-30% of the initial berm height and the berm is 70-75% eroded by volume.
- Publication:
-
AGU Fall Meeting Abstracts
- Pub Date:
- December 2013
- Bibcode:
- 2013AGUFMEP21A..07S
- Keywords:
-
- 1821 HYDROLOGY Floods;
- 4217 OCEANOGRAPHY: GENERAL Coastal processes;
- 4303 NATURAL HAZARDS Hydrological;
- 4558 OCEANOGRAPHY: PHYSICAL Sediment transport