Density limits and control in the Globus-M spherical tokamak
Abstract
The results of the experimental campaign on Globus-M (R = 0.36 m, a = 24 m) devoted to investigating density limits and density control are reported. The experiments were performed at Btor = 0.4 T, Ip = 0.18-0.25 MA, q95 = 3.5-5 and plasma vertical elongation, κ ~ 1.5-1.7. The density limits achieved with the gas puffing method of density control in the previous periods in ohmic heating (OH) regime are discussed. The progress made in OH scenario optimization helped the density to approach the Greenwald limit. Co-current neutral beam of deuterium with the power in the range of 0.45-0.6 MW at the beam energy of 28-29 keV was injected into deuterium target plasma at the early stage of the discharge, which allowed the density to overcome the Greenwald limit. Line averaged densities in excess of 1.5 × 1020 m-3 were achieved, during the external gas puff. An ion temperature increase, measured by NPA was accompanied by a definite increase in the electron energy content, registered by Thomson scattering. Injection of a pure, highly ionized hydrogen plasma jet with a density up to 1022 m-3, total number of accelerated particles (1-5) × 1019 and a flow velocity of ~110 km s-1 was used as another instrument for density control. It increased plasma particle inventory in the Globus-M by ~50% (from 0.65 × 1019 to 1 × 1019) in a single shot without target OH plasma parameter degradation. The injection resulted in a fast density increase with the time much shorter than with gas puff fuelling, which was confirmed by Thomson scattering measurements.
- Publication:
-
Nuclear Fusion
- Pub Date:
- August 2006
- DOI:
- 10.1088/0029-5515/46/8/S03
- Bibcode:
- 2006NucFu..46S.584G