High repetition rate intense ion beam source
Abstract
This final report describes a less than or equal to 150kV, 40kA, 100ns high repetition rate pulsed power system and intense ion beam source which is now in operation at Cornell University. Operation of the Magnetically-controlled Anode Plasma (MAP) ion diode at greater than 100Hz (burst mode for up to 10 pulse bursts) provides an initial look at repetition rate limitations of both the ion diode and beam diagnostics. The pulsed power systems are capable of greater than or equal to 1kHz operation (up to 10 pulse bursts), but ion diode operation was limited to approximately 100Hz because of diagnostic limitations. By varying MAP diode operating parameters, ion beams can be extracted at a few 10s of keV or at up to 150keV, the corresponding accelerating gap impedance ranging from about 1 omega to about 10 omega. The ability to make hundreds of test pulses per day at an average repetition rate of about 2 pulses per minute permits statistical analysis of diode operation as a function of various parameters. Most diode components have now survived more than 10(exp 4) pulses, and the design and construction of the various pulsed power components of the MAP diode which have enabled us to reach this point are discussed. A high speed data acquisition system and companion analysis software capable of acquiring pulse data at 1ms intervals (in bursts of up to 10 pulses) and processing it in less than or equal to one min. is described.
- Publication:
-
Unknown
- Pub Date:
- January 1992
- Bibcode:
- 1992hrri.rept.....H
- Keywords:
-
- Data Acquisition;
- Ion Beams;
- Ion Sources;
- Plasma Diodes;
- Pulse Communication;
- Pulsed Lasers;
- Magnetic Fields;
- Pulses;
- Thermionic Diodes;
- Nuclear and High-Energy Physics