US automated rendezvous and capture capabilities review. Remote umbilical system abstract
Abstract
This document will describe the technology developed at Kennedy Space Center (KSC) to demonstrate automatic tracking, docking, and mating of umbilical systems. Specifically the use of a real time six degree of freedom (6DOF) target tracking vision system, (developed by Adaptive Automation, Inc. under contract to KSC), is discussed in detail. The paper describes the use of mechanical compliance in the docking, mating, and tracking-after-mating operations. The vision system computes six coordinates that define the position and orientation of a three dimensional target using data from a single CCD camera. The camera is mounted on a 6DOF robot arm. After target coordinates are computed, they are transmitted to a supervisory computer which controls the robot motion in real time. Details of the image processing algorithms, image processing hardware, and target configuration used in the vision system are discussed in the paper. The motion of the space vehicle relative to the service structure after mating led us to the development of a compliant system that allows enough displacement of the target relative to the camera so that tracking after mating may continue. This reduces internal stresses between flight and ground hardware.
- Publication:
-
Automated Rendezvous and Capture Review. Executive Summary
- Pub Date:
- 1991
- Bibcode:
- 1991arcr.nasaQ....D
- Keywords:
-
- Automatic Control;
- Image Processing;
- Real Time Operation;
- Remote Control;
- Robot Arms;
- Robot Control;
- Robot Dynamics;
- Spacecraft Control;
- Spacecraft Docking;
- Spacecraft Tracking;
- Umbilical Connectors;
- Algorithms;
- Cameras;
- Charge Coupled Devices;
- Degrees Of Freedom;
- Displacement;
- Elastic Properties;
- Residual Stress;
- Astrodynamics