Evaluation of use of MPAD trajectory tape and number of orbit points for orbiter mission thermal predictions
Abstract
The application of using the mission planning and analysis division (MPAD) common format trajectory data tape to predict temperatures for preflight and post flight mission analysis is presented and evaluated. All of the analyses utilized the latest Space Transportation System 1 flight (STS-1) MPAD trajectory tape, and the simplified '136 note' midsection/payload bay thermal math model. For the first 6.7 hours of the STS-1 flight profile, transient temperatures are presented for selected nodal locations with the current standard method, and the trajectory tape method. Whether the differences are considered significant or not depends upon the view point. Other transient temperature predictions are also presented. These results were obtained to investigate an initial concern that perhaps the predicted temperature differences between the two methods would not only be caused by the inaccuracies of the current method's assumed nominal attitude profile but also be affected by a lack of a sufficient number of orbit points in the current method. Comparison between 6, 12, and 24 orbit point parameters showed a surprising insensitivity to the number of orbit points.
- Publication:
-
NASA STI/Recon Technical Report N
- Pub Date:
- November 1979
- Bibcode:
- 1979STIN...8016081V
- Keywords:
-
- Aerodynamic Heating;
- Mission Planning;
- Prediction Analysis Techniques;
- Space Shuttle Orbiters;
- Space Transportation System 1 Flight;
- Computer Programs;
- Graphs (Charts);
- Operations Research;
- Spacecraft Trajectories;
- Thermal Analysis;
- Astrodynamics