Experiences with ATE providing testability of microprocessor boards
Abstract
The paper describes studies of microprocessor board testing and specific experiences with boards containing the 8080 microprocessor. The testing of microprocessor boards has been performed, based upon simulation using high-level functional models. The recommended test strategy is first to partition test activity into functional subsections of the board and then to increment the speed of test activity in stages. High-speed and synchronization capabilities are desirable features of the tester hardware. It is also desirable to have some simple testability features in the board design, specifically, control of the speed of board activity and control of microprocessor memory accesses. With such favorable conditions, effective testing of the microprocessor board is straightforward. When testability conditions are less than ideal, work-around techniques are required which tend to make test setup more difficult and/or tend to reduce test effectiveness.
- Publication:
-
IEEE Transactions on Instrumentation Measurement
- Pub Date:
- June 1978
- DOI:
- 10.1109/TIM.1978.4314653
- Bibcode:
- 1978ITIM...27..178P
- Keywords:
-
- Automatic Test Equipment;
- Circuit Boards;
- Electronic Equipment Tests;
- Logic Circuits;
- Microprocessors;
- Reliability Analysis;
- Chips (Electronics);
- Circuit Reliability;
- Computer Programs;
- Computerized Simulation;
- High Speed;
- Testing Time;
- Electronics and Electrical Engineering