RAPID COMMUNICATION: A simple test for high Jc and low Rs superconducting thin films

A simple method, fishing high-T_c superconductor thin films out of a liquid nitrogen bath by a permanent magnet (field > H_c1), due to the effect of high flux pinning, has been suggested to identify films that have high critical current density (J_c > 10⁶ A cm^-2 at 77 K) and thus a low microwave surface resistance (R_s). We have demonstrated that a Nd-Fe-B magnet, having a maximum field of ~0.5 T, could fish out Tl-1223 superconducting thin films on LSAT substrate with a thickness of ~5000 Å having J_c > 1 MA cm^-2 (at 77 K) whereas it could not fish out other films with J_c < 0.1 MA cm^-2 at 77 K. The fished out films exhibit R_s values 237-245 µm at 77 K and 10 GHz, which is lower than that (R_s = 317 µm) of the commercially available YBCO film at the same temperature and frequency. On the other hand, the non-fishable films show very high R_s values. This method is a very simple tool to test for high J_c and good microwave properties of large area superconducting films which would otherwise require a special and expensive tool.