The sparse readout RIGEL Application Specific Integrated Circuit for Pixel Silicon Drift Detectors in soft X-ray imaging space applications

An Application Specific Integrated Circuit (ASIC), called RIGEL, designed for the sparse readout of a Silicon Pixel Drift Detector (PixDD) for space applications is presented. The low leakage current (less than 1 pA at +20 °C) and anode capacitance (less than 40 fF) of each pixel (300 μm × 300 μm) of the detector, combined with a low-noise electronics readout, allow to reach a high spectroscopic resolution performance even at room temperature. The RIGEL ASIC front-end architecture is composed by a 2-D matrix of 128 readout pixel cells (RPCs), arranged to host, in a 300 μm-sided square area, a central octagonal pad (for the PixDD anode bump-bonding), and the full-analog processing chain, providing a full-shaped and stretched signal. In the chip periphery, the back-end electronics features 16 integrated 10-bits Wilkinson ADCs, the configuration register and a trigger management circuit. The characterization of a single RPC has been carried out whose features are: eight selectable peaking times from 0.5 μs to 5 μs, an input charge range equivalent to 30 keV, and a power consumption of less than 550 μW per channel. The RPC has been tested also with a 4×4 prototype PixDD and 167 eV Full Width at Half Maximum (FWHM) at the 5.9 keV line of ⁵⁵Fe at 0 °C and 1.8 μs of peaking time has been measured.