3D Printed PVDF
Abstract
In this paper we report on the 3D printing and testing of the piezoelectric polymer polyvinylidene difluoride (PVDF). Samples of PVDF were fabricated using a fused deposition modeling (FDM) 3D printer and then activated using a corona poling process. The d33 piezoelectric coefficient, which is related to the overall piezoelectric performance, was experimentally measured using a d33 meter to be 6 pC/N. While less than commercially available PVDF fabricated using traditional techniques (which can have a d33 between 10 and 40 pC/N), the value of 6 pC/N achieved in this work is several orders of magnitude larger than comparable previously published results for 3D printed PVDF, and as a result represents a significant step in the 3D printing of piezoelectric polymers.
- Publication:
-
arXiv e-prints
- Pub Date:
- February 2021
- DOI:
- 10.48550/arXiv.2102.13084
- arXiv:
- arXiv:2102.13084
- Bibcode:
- 2021arXiv210213084I
- Keywords:
-
- Physics - Applied Physics
- E-Print:
- This report is also available on the Defense Technical Information Center (DTIC) through the R&