Bridge modal identification using acceleration measurements within moving vehicles
Abstract
Vehicles commuting over bridge structures respond dynamically to the bridge's vibrations. An acceleration signal collected within a moving vehicle contains a trace of the bridge's structural response, but also includes other sources such as the vehicle suspension system and surface roughness-induced vibrations. This paper introduces two general methods for the bridge system identification using data exclusively collected by a network of moving vehicles. The contributions of the vehicle suspension system are removed by deconvolving the vehicle response in frequency domain. The first approach utilizes the vehicle transfer function, and the second uses ensemble empirical modal decomposition (EEMD). Next, roughness-induced vibrations are extracted through a novel application of second-order blind identification (SOBI) method. After these two processes, the resulting signal is equivalent to the readings of mobile sensors that scan the bridge's dynamic response. Structural modal identification using mobile sensor data has been recently made possible with the extended structural modal identification using expectation maximization (STRIDEX) algorithm. The processed mobile sensor data is analyzed using STRIDEX to identify the modal properties of the bridge. The performance of the methods are validated on numerical case studies of a long single-span bridge with a network of moving vehicles collecting data while in motion. The analyses consider three road surface roughness patterns. Results show that for long-span bridges with medium- to high-ongoing traffic volume, the proposed algorithms are successful in extracting pure bridge vibrations, and produce accurate and comprehensive modal properties of the bridge. The study shows that the proposed transfer function method can efficiently deconvolve the linear dynamics of a moving vehicle. EEMD method is able to extract vehicle dynamic response without a priori information about the vehicle. In addition, proposed identification methods provide secondary information about the roughness pattern and the vehicle. This study is the first proposed methodology for complete bridge modal identification, including operational natural frequencies, mode shapes and damping ratios using moving vehicles sensor data.
- Publication:
-
Mechanical Systems and Signal Processing
- Pub Date:
- July 2020
- DOI:
- 10.1016/j.ymssp.2020.106733
- arXiv:
- arXiv:2001.01797
- Bibcode:
- 2020MSSP..14106733S
- Keywords:
-
- System identification;
- Mobile sensing;
- Blind source separation;
- Structural health monitoring;
- Frequency response function;
- Output-only;
- Electrical Engineering and Systems Science - Signal Processing;
- Statistics - Applications
- E-Print:
- submitted to Mechanical Systems and Signal Processing