Effects of gap and elevated pressure on ethanol reforming in a non-thermal plasma reactor

Production of hydrogen for fuel cell vehicles, mobile power generators and for hydrogen-enhanced combustion from ethanol is demonstrated using energy-efficient non-thermal plasma reforming. A tubular reactor with a multipoint electrode system operated in pulsed mode was used. Complete conversion can be achieved with high selectivity (based on ethanol) of H₂ and CO of 111% and 78%, respectively, at atmospheric pressure. An elevated pressure of 15 psig shows improvement of selectivity of H₂ and CO to 120% and 87%, with a significant reduction of C₂H_x side products. H₂ selectivity increased to 127% when a high ratio (29.2) of water-to-ethanol feed was used. Increasing CO₂ selectivity is observed at higher water-to-ethanol ratios indicating that the water gas shift reaction occurs. A higher productivity and lower C₂H_x products were observed at larger gas gaps. The highest overall energy efficiency achieved, including electrical power consumption, was 82% for all products or 66% for H₂ only.