Experimental and numerical study of error fields in the CNT stellarator
Abstract
Sources of error fields were indirectly inferred in a stellarator by reconciling computed and numerical flux surfaces. Sources considered so far include the displacements and tilts of the four circular coils featured in the simple CNT stellarator. The flux surfaces were measured by means of an electron beam and fluorescent rod, and were computed by means of a Biot-Savart field-line tracing code. If the ideal coil locations and orientations are used in the computation, agreement with measurements is poor. Discrepancies are ascribed to errors in the positioning and orientation of the in-vessel interlocked coils. To that end, an iterative numerical method was developed. A Newton-Raphson algorithm searches for the coils’ displacements and tilts that minimize the discrepancy between the measured and computed flux surfaces. This method was verified by misplacing and tilting the coils in a numerical model of CNT, calculating the flux surfaces that they generated, and testing the algorithm’s ability to deduce the coils’ displacements and tilts. Subsequently, the numerical method was applied to the experimental data, arriving at a set of coil displacements whose resulting field errors exhibited significantly improved agreement with the experimental results.
- Publication:
-
Plasma Physics and Controlled Fusion
- Pub Date:
- July 2016
- DOI:
- 10.1088/0741-3335/58/7/074002
- arXiv:
- arXiv:1602.04867
- Bibcode:
- 2016PPCF...58g4002H
- Keywords:
-
- Physics - Plasma Physics
- E-Print:
- Special Issue on the 20th International Stellarator-Heliotron Workshop