Steady-State Flow-Force Compensation in a Hydraulic Spool Valve
Abstract
A high-speed jet flowing inside of a partially-open hydraulic valve is accompanied by a reaction force, also referred to as flow force. The nature of this force has remained a mystery despite an extensive research effort spanning many decades. The momentum theory on the flow force by Lee and Blackburn (1952) explains the origin of the flow force and offers a design solution to shape the valve spool as a turbine bucket. It provides a model to calculate the compensated flow force as well. This paper shows that the model applies to a different flow case due to incorrect assumptions made. A corrected equation is presented based on a detailed analysis of the static-pressure distribution in the valve cavity as well as on a literature review of pressure loss in diffusers and nozzles. The new equation is based on the compensation taking place upstream of the valve orifice, not downstream as assumed by the momentum theory. The new model can be applied to chamfers or notches on the valve spool without the need to machine a complete turbine-bucket profile. Keywords: flow force, flow-force compensation, hydraulic valve design, control volume, fluid momentum, pressure loss, nozzles, diffusers, CFD.
- Publication:
-
arXiv e-prints
- Pub Date:
- December 2013
- DOI:
- 10.48550/arXiv.1312.1310
- arXiv:
- arXiv:1312.1310
- Bibcode:
- 2013arXiv1312.1310L
- Keywords:
-
- Physics - Fluid Dynamics
- E-Print:
- 12 pages, 11 figures