Influence of flow confinement on the drag force on a static cylinder

The influence of confinement on the drag force F on a static cylinder in a viscous flow inside a rectangular slit of aperture h₀ has been investigated from experimental measurements and numerical simulations. At low enough Reynolds numbers, F varies linearly with the mean velocity and the viscosity, allowing for the precise determination of drag coefficients λ_∥ and λ_⊥ corresponding, respectively, to a mean flow parallel and perpendicular to the cylinder length L. In the parallel configuration, the variation in λ_∥ with the normalized diameter β =d/h₀ of the cylinder is close to that for a two-dimensional (2D) flow invariant in the direction of the cylinder axis and does not diverge when β =1. The variation in λ_∥ with the distance from the midplane of the model reflects the parabolic Poiseuille profile between the plates for β ≪1 while it remains almost constant for β ∼1. In the perpendicular configuration, the value of λ_⊥ is close to that corresponding to a 2D system only if β ≪1 and/or if the clearance between the ends of the cylinder and the side walls is very small: in that latter case, λ_⊥ diverges as β →1 due to the blockage of the flow. In other cases, the side flow between the ends of the cylinder and the side walls plays an important part to reduce λ_⊥: a full three-dimensional description of the flow is needed to account for these effects.