Roll-to-roll production of catalyst coated membranes for low-temperature electrolyzers
Abstract
This work demonstrates a roll-to-roll (R2R) process for direct coating of anode catalyst layers on a polymer electrolyte membrane for low-temperature water electrolysis. To develop this process, catalyst ink formulation, ink-membrane interactions, and coating quality were studied. The catalyst inks were a mixture of iridium oxide (IrO2) and Nafion in a water and alcohol dispersion medium. The type of alcohol (methanol, ethanol, propanols) and water-to-alcohol ratio were varied to determine their influence on membrane swelling, dispersion quality, and coatability. Small-scale coating samples were prepared to understand coating uniformity and formation of irregularities. Subsequently, two water/1-propanol ratios (90:10 and 75:25) were down-selected for R2R slot-die coating. The R2R catalyst-coated membrane (CCM) coating process increased catalyst layer production throughput by over 500x compared to our standard lab-scale spray coating. The CCMs obtained from this process were tested as single-cell membrane electrode assemblies. They exhibited a cell voltage of 1.91 V at a current density of 2 A/cm2, which is comparable to spray-coated CCMs. In conclusion, the work presented here demonstrates a continuous, scalable manufacturing process that eliminates the need for the decal-transfer step typically used in CCM production.
- Publication:
-
Journal of Power Sources
- Pub Date:
- December 2020
- DOI:
- 10.1016/j.jpowsour.2020.228819
- Bibcode:
- 2020JPS...47928819P
- Keywords:
-
- Polymer electrolyte membrane water electrolyzers;
- Roll-to-roll;
- Slot-die coating;
- Catalyst coated membranes;
- Iridium oxide;
- Catalyst inks