Pin-fin metal alloy structures enhancing heat transfer in PCM-based heat storage units
Abstract
PCMs (phase change materials) applied in heat storage technology are on the one hand characterised by relatively large specific heat capacity, and on the other hand by relatively low thermal conductivity (e.g. 0.2 W·m-1·K-1) for paraffin), which prolongs the charging/discharging cycles of heat accumulators based on such materials. In order to improve the heat transfer within PCMs, spatially shaped pin-fin metal alloy structures are being developed that have been immersed in the PCM material. Pin-fin metallic structures can be manufactured via investment casting technology. The 3D structures produced using this technique can be modified and adjusted in order to improve the heat transfer parameters (heat conductivity, specific heat transfer area). For this study, complex metal alloy pin-fin structures were immersed in paraffin, and an experimental test stand was built in order to examine the heat transfer characteristics of composite PCMs with pin-fin metal structures. Multiple heating/cooling cycles confirmed the enhanced transfer of heat inside the heat storage unit and allowed us to ascertain the decreased temperature gradient within the heat accumulator. The heat transfer phenomenon was simulated to show heating and melting course nearby metal inserts and confirm the beneficial influence of the applied pin-fin geometry, that can be further optimized. The thermal behaviour of the PCM, tested with DSC and TGA analysis, was used as an input for the simulation.
- Publication:
-
Heat and Mass Transfer
- Pub Date:
- July 2020
- DOI:
- 10.1007/s00231-020-02861-6
- Bibcode:
- 2020HMT....56.2265D