Improving Composite Tensile Properties during Resin Infusion Based on a Computer Vision Flow-Control Approach
Abstract
Liquid composite manufacturing techniques, mainly applied in the transport industry, have been studied and optimized for decades while defect analysis and its minimization have been a goal to increase reliability and mechanical performance. Researchers have found that many process parameters have a strong influence on the mechanical behavior of composite structures where the flow front velocity, closely related to voids, plays a considerable role. In this work, the optimal flow front velocity was evaluated and controlled using a computer vision system for different laminates improving the mechanical tensile properties and void content. Enhanced mechanical tensile properties were found using a feedback flow-controller vision system which was able to keep the optimal flow front velocity constant to reduce the air traps among tows and fibers. Tensile strength was enhanced up to 18% for fiber orientation at 0° and 3.3% at 90°, whereas tensile modulus was increased up to 18.4% for fibers at 0° and 8.7% at 90°. A novel methodology is presented through this work, aiming to improve the robustness of resin film infusion (RFI) processes while ensuring the quality of the composite material.
- Publication:
-
Materials
- Pub Date:
- December 2018
- DOI:
- 10.3390/ma11122469
- Bibcode:
- 2018Mate...11.2469A
- Keywords:
-
- composite;
- tensile;
- optimization;
- automotive;
- lightweight design