Simulation of Dynamo Action Generated by a Precession Driven Flow.

Since many years precession is regarded as an alternative flow drivingmechanism that may account, e.g., for remarkable features of theancient lunar magnetic field [Dwyer 2011; Noir 2013; Weiss 2014] or asa complementary power source for the geodynamo [Malkus 1968; Vanyo1991]. Precessional forcing is also of great interest from theexperimental point of view because it represents a natural forcingmechanism that allows an efficient driving of conducting fluid flowson the laboratory scale without making use of propellers orpumps. Within the project DRESDYN (DREsden Sodium facility for DYNamoand thermohydraulic studies) a dynamo experiment is under developmentat Helmholtz-Zentrum Dresden-Rossendorf (HZDR) in which a precessiondriven flow of liquid sodium with a magnetic Reynolds number of up toRm=700 will be used to drive dynamo action.Our present study addresses preparative numerical simulations and flowmeasurements at a small model experiment running with water. Theresulting flow pattern and amplitude provide the essential ingredientsfor kinematic dynamo models that are used to estimate whether theparticular flow is able to drive a dynamo. In the strongly non-linearregime the flow essentially consists of standing inertial waves (see Figure). Most remarkable feature is the occurrence of a resonant-like axisymmetricmode which emerges around a precession ratio of Ωp/Ωc = 0.1on top of the directly forced re-circulation flow. The combination ofthis axisymmetric mode and the forced m=1 Kelvin mode is indeedcapable of driving a dynamo at a critical magnetic Reynolds number ofRmc=430 which is well within the range achievable in theexperiment. However, the occurrence of the axisymmetric mode slightlydepends on the absolute rotation rate of the cylinder and futureexperiments are required to indicate whether it persists at theextremely large Re that will be obtained in the large scale sodiumexperiment.