First Applications of DoD Iridium RUDICS in the NSF Polar Programs

We will present the first deployment and application of the new Iridium RUDICS service to remote instrumentation projects within the National Science Foundation's polar programs. The rise of automated observing networks has increased the demand for real-time connectivity to remote instruments, not only for immediate access to data, but to also interrogate health and status. Communicating with field sites in the polar regions is complicated by the remoteness from existing infrastructure, low temperatures and limited connection options. Sites located above 78° latitude are not able to see geostationary satellites, leaving the Iridium constellation as the only one that provide a direct connection. Some others, such as Orbcomm, only provide a store-and-forward service. Iridium is often used as a dial up modem to establish a PPP connection to the Internet with data files transferred via FTP. On low-bandwidth, high-latency networks like Iridium (2400bps with ping times of seconds), this approach is time consuming and inefficient. The dial up time alone takes upwards of a minute, and standard TCP/IP and FTP protocols are hampered by the long latencies. Minimizing transmission time is important for reducing battery usage and connection costs. The new Iridium RUDICS service can be used for more efficient transfers. RUDICS is an acronym for "Router-based Unstructured Digital Inter-working Connectivity Solution" and provides a direct connection between an instrument in the field and a server on the Internet. After dialing into the Iridium gateway, a socket connection is opened to a registered port on a user's server. Bytes sent to or from the modem appear at the server's socket. The connection time is reduced to about 10 seconds because the modem training and PPP negotiation stages are eliminated. The remote device does not need to have a full TCP/IP stack, allowing smaller instruments such as data loggers to directly handle the data transmission. Alternative protocols can be deployed that better exploit the characteristics of the Iridium channel. In addition, the setup naturally scales to handle hundreds of remote devices, an important aspect for larger sensor networks. As part of the NSF's Arctic Research Support and Logistics Services, we have deployed RUDICS systems with three different research projects. These are the first NSF RUDICS deployments for projects using the Department of Defense Iridium gateway, which allows for unlimited connection time at a flat monthly rate for US government users. The first project is O-Buoy, an IPY-OASIS project for self-contained, autonomous observations of atmospheric chemical species in the polar marine boundary layer. The second project is collection of low-power instrument towers on Alaska's North Slope at Imnavait Creek, part of the Arctic Observation Network (AON). Lastly, the autonomous instrument platform at Ivotuk, Alaska, uses RUDICS to provide telemetry about the renewable energy systems. A set of real-time web displays allow researchers for each project to monitor their remote sites and access real-time data.