The rotating vibration behaviors of full cycle of 60 blades are studied in this report. The dynamic analysis of two different structures in one of which there are 10 groups of 6 blades and in the other 5 groups of 12 blades, is performed to investigate behavior deviation. In this research, the following jobs are considered: (1) collect the geometric dimensions and material properties of a single blade, (2) create the finite element model of a single blade, a group of 6 blades and 12 blades, and full cycle of 60 blades, (3) perform the vibration analyses of a single blade, a group of blades and a full circle of 60 blades, (4) perform the steady state stress analysis of the blade with different rotating speed; (5) get the Campbell diagram for the full circle of blades, and (6) make comparisons between a group of 6 blades and a group of 12 blades. The conclusions from the analyses are the following: (1) the contact elements are applied to groups of 6 and 12 blades systems and the highest stresses are observed at the location of the first neck of the blade root. These results completely agree very well with in-site observations. (2) The big differences were present in the Campbell diagram: resonant frequencies are observed in the first vibration group for the full system comprising the group of 6 blades and resonant frequencies are not found in the first vibration group of the full blade system made of the group of 12 blades. (3) The dynamic behavior of the full blade system comprised of a group of 6 blades was found much different from that of the full blade system made is of a group of 12 blades. (4) Excellent agreements for the vibration frequencies and mode shapes of a single blade and a full circle of blades are obtained between the FEA results and experimental data.