Texture of primary recrystallization on nonoriented electrical steel sheet with phase transformation
Abstract
The magnetic properties of nonoriented (NO) electrical steel sheet are commonly improved if the texture of their products possesses "cube texture" (e.g., {100 «0vw», "goss texture") (i.e., '10«011», and less ²22 texture). Industrially "cube type" has not been obtained, but "goss texture" has been. In a greater or lesser degree, {222} texture exists. To improve "goss texture" and reduce ²22 texture, the grain size of the material prior to cold rolling should be larger. When the grain size before cold rolling is larger, during primary recrystallization, "goss texture" is enriched, ²22 texture is decreased, and the grain grows so easily that higher induction and lower core loss can be obtained. This does not depend on the presence of phase transformation. In case of NO steel with phase transformation, heat treatment before cold rolling has been done below the austenite transition temperature (Acin1) in order to prevent the fine grain size caused by α → γ(+α) → α transformation. By using material that was heated over Acin1 and cooled with changing cooling rates, this study describes (a) the relationship between textures before cold rolling and the texture of the final product, and (b) the development of the magnetic properties.
- Publication:
-
Journal of Materials Engineering and Performance
- Pub Date:
- August 1995
- DOI:
- 10.1007/BF02649299
- Bibcode:
- 1995JMEP....4..401K
- Keywords:
-
- electric steels;
- recrystallization;
- texture