Effects of Discarded Drill Muds on Microbial Populations

Drilling operations from platforms in the North Sea result in the production of large quantities of drill cuttings. These are a variable mixture of rock chippings, clays and original drilling fluids. Drilling mud is cleaned on the platform to remove rock chips before re-use of the mud. The rejected fraction from the clean-up plant (the cuttings) contains some of the base drilling fluid, and this can lead to an organically rich input to the sea-bed. Cuttings are discarded immediately underneath the platform jacket and thus build-up over the natural seabed sediment. In many cases this cuttings pile may cover considerable areas of seabed, leading to seabed biological effects and potential corrosion problems. Different types of cuttings have different environmental impacts, this being partly dependent upon their hydrocarbon component. Diesel-oil based cuttings contain significant amounts of toxic aromatic hydrocarbons, whereas low-toxicity, kerosene-based cuttings contain less. Both types of cuttings support an active microbiological flora, initiated by hydrocarbon oxidation. This paper presents a study of microbiological degradation of hydrocarbons in cuttings piles around two North Sea platforms. Results indicate that there is a close correlation between microbiological activity and hydrocarbon breakdown in the surface of cuttings piles and that both of these parameters reach their maximum values closer to the platform when low-toxicity muds are in use.