Optimation of cooled shields in insulations
Abstract
A method to optimize the location, temperature, and heat dissipation rate of each cooled shield inside an insulation layer was developed. The method is based on the minimization of the entropy production rate which is proportional to the heat leak across the insulation. It is shown that the maximum number of shields to be used in most practical applications is three. However, cooled shields are useful only at low values of the overall, cold wall to hot wall absolute temperature ratio. The performance of the insulation system is relatively insensitive to deviations from the optimum values of the temperature and location of the cooling shields. Design curves for rapid estimates of the locations and temperatures of cooling shields in various types of insulations, and an equation for calculating the cooling loads for the shields are presented.
- Publication:
-
Final Report Illinois Univ
- Pub Date:
- April 1984
- Bibcode:
- 1984uill.reptR....C
- Keywords:
-
- Cooling;
- Cryogenic Equipment;
- Entropy;
- Insulation;
- Shielding;
- Vaporizers;
- Numerical Analysis;
- Optimization;
- Thermodynamic Properties;
- Fluid Mechanics and Heat Transfer