Technique for microswitch manufacture
Abstract
A five-step technique for microswitch manufacture is described: (1) A clad board is inlaid with a precious metal and the board is pressed. (2) One end of the fixed contact containing a precious metal inlay section is curved, and this edge of the precious metal inlay section becomes a fixed contact. (3) Inserts are formed in the unit body and terminal strips are placed through the top and bottom of the base and held. (4) The unit body is held by the base and the sequential contact strips are cut off. (5) Movable stripes are attached to the support of the terminal strips on the movable side and movable contacts are placed opposite the fixed contacts.
- Publication:
-
NASA STI/Recon Technical Report N
- Pub Date:
- May 1983
- Bibcode:
- 1983STIN...8330912K
- Keywords:
-
- Electric Switches;
- Japan;
- Manufacturing;
- Technology Utilization;
- Fabrication;
- Product Development;
- Switches;
- Technologies;
- Electronics and Electrical Engineering