Electronic system for high power load control
Abstract
Parallel current paths are divided into two groups, with control devices in the current paths of one group each having a current limiting resistor, and the control devices in the other group each having no limiting resistor, so that when the control devices of the second group are turned fully on, a short circuit is achieved by the arrangement of parallel current paths. Separate but coordinated control signals are provided to turn on the control devices of the first group and increase their conduction toward saturation as a function of control input, and when fully on, or shortly before, to turn on the control devices of the second group and increase their conduction toward saturation as a function of the control input as that input continues to increase. Electronic means may be used to generate signals. The system may be used for 1-V characteristic measurements of solar arrays as well as for other load control purposes.
- Publication:
-
National Aeronautics and Space Administration Report
- Pub Date:
- December 1980
- Bibcode:
- 1980nasa.reptX....M
- Keywords:
-
- Control Equipment;
- Current Regulators;
- Electronic Control;
- Field Effect Transistors;
- High Voltages;
- Solar Arrays;
- Limiter Circuits;
- Open Circuit Voltage;
- Patents;
- Potentiometers (Resistors);
- Power Amplifiers;
- Signal Generators;
- Electronics and Electrical Engineering